Mouse Endothelin-1 ELISA Kit
- SKU:
- MOFI00182
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P22387
- Sensitivity:
- 0.625pg/ml
- Range:
- 1.25-80pg/ml
- ELISA Type:
- Competitive ELISA, Coated with Antigen
- Synonyms:
- ET-1, Endothelin-1, EDN1, ET1, HDLCQ7, PPET1, Preproendothelin-1, endothelin 1, preproendothelin-1
- Reactivity:
- Mouse
Description
| 商品名: | Mouse Endothelin-1 ELISA Kit |
| 製品コード: | MOFI00182 |
| サイズ: | 96 Assays |
| エイリアス: | ET-1, Endothelin-1, EDN1, ET1, HDLCQ7, PPET1, Preproendothelin-1, endothelin 1, preproendothelin-1 |
| 検出方法: | Competitive ELISA |
| 申し込み: | This immunoassay kit allows for the in vitro quantitative determination of Mouse Edn1 concentrations in serum plasma and other biological fluids. |
| 感度: | 0.625pg/ml |
| 範囲: | 1.25-80pg/ml |
| 保管所: | 4°C for 6 months |
| ノート: | For Research Use Only |
| 回復: | Matrices listed below were spiked with certain level of Mouse Edn1 and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Edn1 in samples. | ||||||||||||||||
| |||||||||||||||||
| 直線性: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Edn1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra Assay: | CV <8% | ||||||||||||||||
| Inter Assay: | CV <10% |
| 成分 | 量 | 保管所 |
| ELISA Microplate(Dismountable) | 8-12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 60ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
必要なその他の材料と設備：
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P22387 |
| UniProt Protein Function: | EDN1: Endothelins are endothelium-derived vasoconstrictor peptides. Belongs to the endothelin/sarafotoxin family. |
| UniProt Protein Details: | Protein type:Secreted; Secreted, signal peptide Cellular Component: extracellular space; cell; cytoplasm; extracellular region; cytosol Molecular Function:protein binding; hormone activity; endothelin B receptor binding; cytokine activity; endothelin A receptor binding; receptor binding Biological Process: positive regulation of JNK activity; elevation of cytosolic calcium ion concentration during G-protein signaling, coupled to IP3 second messenger (phospholipase C activating); regulation of systemic arterial blood pressure by endothelin; heart development; middle ear morphogenesis; prostaglandin biosynthetic process; sensory perception of pain; positive regulation of MAP kinase activity; negative regulation of cAMP biosynthetic process; elevation of cytosolic calcium ion concentration; cell surface receptor linked signal transduction; cell-cell signaling; negative regulation of nitric-oxide synthase biosynthetic process; protein kinase C activation; regulation of blood vessel size; cell growth; rhythmic excitation; positive regulation of mitosis; positive regulation of heart rate; respiratory gaseous exchange; peptide hormone secretion; patterning of blood vessels; membrane depolarization; protein kinase C deactivation; regulation of vasoconstriction; blood vessel morphogenesis; positive regulation of transcription from RNA polymerase II promoter; superoxide release; positive regulation of odontogenesis; epithelial fluid transport; phosphoinositide 3-kinase cascade; positive regulation of cell size; neural crest cell development; G-protein signaling, phospholipase D activating pathway; positive regulation of smooth muscle cell proliferation; negative regulation of hormone secretion; negative regulation of cellular protein metabolic process; negative regulation of transcription from RNA polymerase II promoter; glucose transport; vein smooth muscle contraction; histamine secretion; nitric oxide transport; regulation of blood pressure; positive regulation of cell proliferation; regulation of pH; positive regulation of smooth muscle contraction; skeletal development; artery smooth muscle contraction; vasoconstriction; inositol phosphate-mediated signaling; in utero embryonic development; calcium-mediated signaling; positive regulation of hormone secretion; body fluid secretion; G-protein coupled receptor protein signaling pathway; dorsal/ventral pattern formation; cartilage development; positive regulation of prostaglandin secretion; response to hypoxia; regulation of sensory perception of pain; positive regulation of cell migration |
| UniProt Code: | P22387 |
| NCBI GenInfo Identifier: | 1706710 |
| NCBI Gene ID: | 13614 |
| NCBI Accession: | P22387.3 |
| UniProt Secondary Accession: | P22387,P70203, P97338, |
| UniProt Related Accession: | P22387 |
| Molecular Weight: | 22,809 Da |
| NCBI Full Name: | Endothelin-1 |
| NCBI Synonym Full Names: | endothelin 1 |
| NCBI Official Symbol: | Edn1 |
| NCBI Official Synonym Symbols: | ET-1; preproET |
| NCBI Protein Information: | endothelin-1; PPET1; preproendothelin; preproendothelin-1 |
| UniProt Protein Name: | Endothelin-1 |
| UniProt Synonym Protein Names: | Preproendothelin-1; PPET1 |
| Protein Family: | Endothelin |
| UniProt Gene Name: | Edn1 |
| UniProt Entry Name: | EDN1_MOUSE |
*ノート: プロトコルは、各バッチ/ロットに固有です。正しい手順については、キットに含まれているプロトコルに従ってください。
| ステップ | 手順 |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Add Sample and Biotin-detection antibody: Add 50µL of Standard, Blank or Sample per well. The blank well is added with Sample Dilution Buffer. Immediately add 50 µL of biotin-labelled antibody working solution to each well. Cover with the plate sealer provided. Gently tap the plate to ensure thorough mixing. Incubate for 45 minutes at 37°C. (Solutions are added to the bottom of micro-ELISA platewell, avoid touching plate walls and foaming). |
| 3. | Wash: Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 350µL) using a squirt bottle, multi-channel pipette, manifold dispenser orautomated washer. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
| 4. | HRP-Streptavidin Conjugate(SABC): Add 100µL of SABC working solution to each well. Cover with a new Plate sealer. Incubate for 30 minutes at 37°C. |
| 5. | Wash: Repeat the aspiration/wash process for five times. |
| 6. | TMB Substrate: Add 90µL of TMB Substrate to each well. Cover with a new Plate sealer. Incubate for about 10-20 minutes at 37°C. Protect from light. The reaction time can be shortened or extended according to the actual color change, but not more than 30minutes. When apparent gradient appeared in standard wells, you can terminate the reaction. |
| 7. | Stop: Add 50µL of Stop Solution to each well. Color turn to yellow immediately. The adding order of stop solution should be as the same as the substrate solution. |
| 8. | OD Measurement: Determine the optical density (OD Value) of each well at once, using a microplate reader set to 450 nm. You should open the microplate reader ahead, preheat the instrument, and set the testing parameters. |
ELISAアッセイを実施する場合、可能な限り最良の結果を達成するためにサンプルを準備することが重要です。以下に、さまざまなサンプルタイプのサンプルを準備するための手順のリストを示します。
| サンプルタイプ | プロトコル |
| 血清: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| プラズマ: | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| 尿および脳脊髄液: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| 細胞培養上清: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| 細胞溶解物: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| 組織ホモジネート: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| 組織溶解物: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| 母乳: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |