Mouse PTHrP / Parathyroid Hormone Related Protein ELISA Kit
- SKU:
- MOFI01072
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P22858
- Sensitivity:
- 9.375pg/ml
- Range:
- 15.625-1000pg/ml
- ELISA Type:
- Sandwich ELISA, Double Antibody
- Synonyms:
- PTHrP, PaRathyroid Hormone Related Protein, PTHLH, BDE2, HHM, Osteostatin, PTHRP, paRathyroid hormone-like hormone, PaRathyroid hormone-like protein, paRathyroid hormone-related protein, PLPosteostatin, PTHR, PTH-related protein, PTH-rP, paRathyroid
- Reactivity:
- Mouse
Description
商品名: | Mouse PTHrP / Parathyroid Hormone Related Protein ELISA Kit |
製品コード: | MOFI01072 |
サイズ: | 96 Assays |
エイリアス: | PTHrP, PaRathyroid Hormone Related Protein, PTHLH, BDE2, HHM, Osteostatin, PTHRP, paRathyroid hormone-like hormone, PaRathyroid hormone-like protein, paRathyroid hormone-related protein, PLPosteostatin, PTHR, PTH-related protein, PTH-rP, paRathyroid hormone-like related protein |
検出方法: | Sandwich ELISA |
申し込み: | This immunoassay kit allows for the in vitro quantitative determination of Mouse PTHrPrPrP concentrations in serum plasma and other biological fluids. |
感度: | 9.375pg/ml |
範囲: | 15.625-1000pg/ml |
保管所: | 4°C for 6 months |
ノート: | For Research Use Only |
回復: | Matrices listed below were spiked with certain level of Mouse PTHrPrPrP and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse PTHrPrPrP in samples. | ||||||||||||||||
| |||||||||||||||||
直線性: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse PTHrPrPrP and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
Intra Assay: | CV <8% | ||||||||||||||||
Inter Assay: | CV <10% |
成分 | 量 | 保管所 |
ELISA Microplate (Dismountable) | 8-12 strips | 4°C for 6 months |
Lyophilized Standard | 2 | 4°C/-20°C |
Sample/Standard Dilution Buffer | 20ml | 4°C |
Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
Antibody Dilution Buffer | 10ml | 4°C |
HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
SABC Dilution Buffer | 10ml | 4°C |
TMB Substrate | 10ml | 4°C (Protect from light) |
Stop Solution | 10ml | 4°C |
Wash Buffer(25X) | 30ml | 4°C |
Plate Sealer | 5 | - |
必要なその他の材料と設備:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
Uniprot | P22858 |
UniProt Protein Function: | PTHrP: a member of the parathyroid hormone family. This hormone regulates endochondral bone development and epithelial-mesenchymal interactions during the formation of the mammary glands and teeth. This hormone is involved in lactation possibly by regulating the mobilization and transfer of calcium to the milk. The receptor of this hormone, PTHR1, is responsible for most cases of humoral hypercalcemia of malignancy. Three alternatively spliced isoforms have been described. |
UniProt Protein Details: | Protein type:Secreted; Secreted, signal peptide Cellular Component: nucleoplasm; Golgi apparatus; extracellular space; cytoplasm; extracellular region; intracellular; nucleus Molecular Function:peptide hormone receptor binding; hormone activity Biological Process: negative regulation of transcription factor activity; negative regulation of chondrocyte differentiation; G-protein signaling, adenylate cyclase activating pathway; bone mineralization; osteoblast development; epithelial cell differentiation; regulation of gene expression; positive regulation of cell proliferation; positive regulation of cAMP biosynthetic process; protein processing; regulation of chondrocyte differentiation; alveolus development; surfactant homeostasis; skeletal development; endoderm development; endochondral ossification |
NCBI Summary: | This gene encodes a member of the parathyroid family of hormones that possesses distinct paracrine and intracrine signaling roles such as regulation of circulating calcium, transplacental calcium transport, osteoclast inhibition, renal bicarbonate excretion and regulation of apoptosis. The encoded protein undergoes proteolytic processing to generate multiple active peptides with distinct signaling functions. The homozygous deletion of this gene leads to death shortly after birth with a chondrodystrophic phenotype characterized by premature chondrocyte differentiation and accelerated bone formation. [provided by RefSeq, Jul 2015] |
UniProt Code: | P22858 |
NCBI GenInfo Identifier: | 131543 |
NCBI Gene ID: | 19227 |
NCBI Accession: | P22858.1 |
UniProt Related Accession: | P22858 |
Molecular Weight: | Predicted Molecular Mass: 17.4kDaAccurate Molecular Mass: 18/19kDa as determined by SDS-PAGE reducing conditions. |
NCBI Full Name: | Parathyroid hormone-related protein |
NCBI Synonym Full Names: | parathyroid hormone-like peptide |
NCBI Official Symbol: | Pthlh |
NCBI Official Synonym Symbols: | Pthrp; PTH-like |
NCBI Protein Information: | parathyroid hormone-related protein; PLP; PTH-rP; PTH-related peptide; parathyroid hormone-like hormone; parathyroid hormone-like protein; parathyroid hormone-related peptide |
UniProt Protein Name: | Parathyroid hormone-related protein |
UniProt Synonym Protein Names: | Parathyroid hormone-like protein |
UniProt Gene Name: | Pthlh |
UniProt Entry Name: | PTHR_MOUSE |
*ノート: プロトコルは、各バッチ/ロットに固有です。正しい手順については、キットに含まれているプロトコルに従ってください。
ステップ td> | 手順 td> |
1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
2. | Aliquot 0.1ml standard solutions into the standard wells. |
3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
4. | Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
ELISAアッセイを実施する場合、可能な限り最良の結果を達成するためにサンプルを準備することが重要です。以下に、さまざまなサンプルタイプのサンプルを準備するための手順のリストを示します。
サンプルタイプ td> | プロトコル td> |
血清: td> | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
プラズマ: td> | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
尿および脳脊髄液: td> | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
細胞培養上清: td> | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
細胞溶解物: td> | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
組織ホモジネート: td> | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
組織溶解物: td> | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
母乳: td> | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |