Mouse Leukotriene B4 receptor 1 / LTB4R ELISA Kit

(No reviews yet) Write a Review
お見積り依頼
SKU:
MOFI00181
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
O88855
Sensitivity:
0.188ng/ml
Range:
0.313-20ng/ml
ELISA Type:
Sandwich ELISA, Double Antibody
Synonyms:
Ltb4r, LTB4-R 1, LTB4-R1,, P2Y purinoceptor 7, P2Y7, Chemoattractant receptor-like 1, G-protein coupled receptor 16, BLT1, LTB4R1, chemokine receptor-like 1, CMKRL1, leukotriene B4 receptor, LTBR1, purinergic receptor P2Y, G-protein coupled, 7
Reactivity:
Mouse
€0.00
Frequently bought together:

Description

system_update_altデータセットsystem_update_alt安全データデータ
商品名:Mouse Leukotriene B4 receptor 1 / LTB4R ELISA Kit
製品コード:MOFI00181
サイズ:96 Assays
エイリアス:Ltb4r, LTB4-R 1, LTB4-R1, P2Y purinoceptor 7, P2Y7, Chemoattractant receptor-like 1, G-protein coupled receptor 16, BLT1, LTB4R1, chemokine receptor-like 1, CMKRL1, leukotriene B4 receptor, LTBR1, purinergic receptor P2Y, G-protein coupled, 7
検出方法:Sandwich ELISA
申し込み:This immunoassay kit allows for the in vitro quantitative determination of Mouse Ltb4r concentrations in serum plasma and other biological fluids.
感度:0.188ng/ml
範囲:0.313-20ng/ml
保管所:4°C for 6 months
ノート:For Research Use Only
回復:Matrices listed below were spiked with certain level of Mouse Ltb4r and the recovery rates were calculated by comparing the measured value to the expected amount of Mouse Ltb4r in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)89-9895
EDTA plasma(n=5)85-10594
UFH plasma(n=5)86-10195
直線性:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mouse Ltb4r and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)90-96%88-104%85-105%
EDTA plasma(n=5)82-99%87-101%87-100%
UFH plasma(n=5)81-95%80-98%83-96%
Intra Assay:CV <8%
Inter Assay:CV <10%
成分量保管所
ELISA Microplate (Dismountable)8-12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)120ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

必要なその他の材料と設備：

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotO88855
UniProt Protein Function:Receptor for leukotriene B4, a potent chemoattractant involved in inflammation and immune response.
UniProt Code:O88855
NCBI GenInfo Identifier:6678728
NCBI Gene ID:16995
NCBI Accession:NP_032545.1
UniProt Related Accession:O88855
Molecular Weight:38,252 Da
NCBI Full Name:leukotriene B4 receptor 1
NCBI Synonym Full Names:leukotriene B4 receptor 1
NCBI Official Symbol:Ltb4r1  
NCBI Official Synonym Symbols:BLT1; BLTR; Ltb4r; mBLTR  
NCBI Protein Information:leukotriene B4 receptor 1
UniProt Protein Name:Leukotriene B4 receptor 1
UniProt Gene Name:Ltb4r  

*ノート:プロトコルは、各バッチ/ロットに固有です。正しい手順については、キットに含まれているプロトコルに従ってください。

ステップ手順
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample (Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37 °C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

ELISAアッセイを実施する場合、可能な限り最良の結果を達成するためにサンプルを準備することが重要です。以下に、さまざまなサンプルタイプのサンプルを準備するための手順のリストを示します。

サンプルタイププロトコル
血清:

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

プラズマ:

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 - g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

尿および脳脊髄液:

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

細胞培養上清:

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

細胞溶解物:

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.

組織ホモジネート:

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

組織溶解物:

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

母乳:

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

View AllClose

View AllClose